The Pennalizer 35

This is an approximate 35 watt tube guitar amplifier designed for the working musician. Light weight, portable size, simple to use and works very well with pedals. The 35 watt platform is very rich, clear and open sounding with a lively dynamic feel. Plenty of power for use in small to medium size venues and will work on larger stages by adding an extension speaker cabinet. The simple Treble & Bass tone stack is very versatile that will allow you to quickly dial in a great sound with most any guitar. The Pennalizer 35 is available as a 1×12 combo or head version with optional reverb.

Recommended for rock, country, Rockabilly, blues and jazz musicians. 

Features and Specifications:

• Volume, Treble and Bass controls.
• Optional tube driven spring reverb.
• All hand-wired, point to point, tube circuitry.
• Fiberboard with eyelet circuit board.
• Solid core push back cloth covered hookup wire.
• Precision Electronics Mil Spec RV4 Potentiometers.
• 16-gauge steel chassis.
• ¾” finger-jointed pine cabinet with 1/2″ plywood baffle. Black or cream tolex with wheat or black grill cloth standard. Custom colors are available.
• Resistors are carbon composition and metal oxide.
• Capacitors are ceramic disc, Mallory 150 coupling, F&T and Sprague electrolytics.
• Transformers are manufactured by Mercury Magnetics.
• Standard speaker is the Celestion Heritage G12H.
• 8 and 4 ohm output jacks.
• Standard tubes are Tung Sol GZ34, 6L6’s, 12AX7’s and 12AT7.
• Dimensions: 18” high x 20” wide x 9” deep.
• Weight: 39lbs (1×12 combo with Reverb).

Pennalizer 35 1×12 combo with Reverb $2249.00

Pennalizer 35 1×12 combo no Reverb $2049.00

Pennalizer 35 head with Reverb $2149.00

Pennalizer 35 head no Reverb $1949.00

The Pennalizer 18

This is an approximate 18 watt tube guitar amplifier designed for the working musician. Light weight, portable size, simple to use and works very well with pedals. The 18 watt platform is very rich and complex with earlier breakup than the Pennalizer 35. This model is great for use in small to medium size venues where earlier breakup is preferred. The simple Treble & Bass tone stack is very versatile that will allow you to quickly dial in a great sound with most any guitar. The Pennalizer 18 is available as a 1×12 combo or head version with optional reverb.

Recommended for rock, country, Rockabilly, blues and jazz musicians. 

 Features & Specifications:

• Volume, Treble and Bass controls.
• Optional tube driven spring reverb.
• All hand-wired, point to point, tube circuitry.
• Fiberboard with eyelet circuit board.
• Solid core push back cloth covered hookup wire.
• Precision Electronics Mil Spec RV4 Potentiometers.
• 16-gauge steel chassis.
• ¾” finger-jointed pine cabinet with 1/2″ plywood baffle. Black or cream tolex with wheat or black grill cloth standard. Custom colors are available.
• Resistors are carbon composition and metal oxide.
• Capacitors are ceramic disc, Mallory 150 coupling, F&T and Sprague electrolytics.
• Transformers are manufactured by Mercury Magnetics.
• Standard speaker is the Celestion Heritage G12H.
• 8 and 4 ohm output jacks.
• Standard tubes are Tung Sol GZ34, 6V6’s, 12AX7’s and 12AT7.
• Dimensions: 18” high x 20” wide x 9” deep.
• Weight: 38lbs (1×12 combo with Reverb).

Pennalizer 18 1×12 combo with Reverb $2199.00

Pennalizer 18 1×12 combo no Reverb $1899.00

Pennalizer 18 head with Reverb $1999.00

Pennalizer 18 head no Reverb $1799.00

The Pennalizer 18 Junior

The P18 Junior is similar to the Standard P18 but it is smaller, lighter with earlier break up. Light weight, portable size, simple to use and also works very well with pedals. This model is great for use in small to medium size venues where earlier breakup is preferred. The simple Treble & Bass tone stack is very versatile that will allow you to quickly dial in a great sound with most any guitar. The Pennalizer 18 Junior is available as a 1×12 combo.

Recommended for rock, country, Rockabilly, blues and jazz musicians. 

 Features & Specifications:

• Volume, Treble and Bass controls.
• Tube driven spring reverb.
• All hand-wired, point to point, tube circuitry.
• Fiberboard with eyelet circuit board.
• Solid core push back cloth covered hookup wire.
• CTS potentiometers.
• 16-gauge steel chassis.
• ¾” finger-jointed pine cabinet with 1/2″ plywood baffle. Black tolex with silver grill cloth standard. Custom colors are available.
• Resistors are carbon composition and metal oxide.
• Capacitors are ceramic disc, Mallory 150 coupling, F&T and Sprague electrolytics.
• Transformers are manufactured by Classic Tone.
• Standard speaker is the Eminence 1258.
• 8 and 4 ohm output jacks.
• Standard tubes are Tung Sol GZ34, 6V6’s, 12AX7’s and 12AT7.
• Dimensions: 18” high x 20” wide x 9” deep.
• Weight: 31lbs (1×12 combo with Reverb).

Pennalizer 18 Junior 1×12 combo with Reverb $1599.00